Service Details

  • Home
  • Service Details

Garment inspection quality QC check:


The garment quality QC inspections preshipment will be done onsite in the factory, and will address the below quality issues in the shipment. Below is an onsite test example:

  • Check the Care label content and symbols-1pc for each size each reference,
    the content match with the client’s requirement and fabric composition.
  • Needle Damage check - Pull the seams by hand in toughly force and check if there is any needle hole caused by the sewing machine - perform this test on all the seams -double check and take a picture especially for” waistband, leg hem, pocket seam, front and back rise...” -If needle damage holes were found, then the sample size increase to S4 record how many pcs with needle damage were found from the sample size S3
  • Check how the garments are folded and show finished folded dimensions of the garments--Check once only
  • Washing test using soap, no color fading.
  • Perform metal detecting test
  • Zipper test - pull through the rivets/zipper/ Velcro and snap it should be resistant-The zip should lock when it closed - The zip should not open from the middle - the stress should be focus on the bartack-20 pcs
  • Symmetric check - check if the right/left leg, sleeves, pocket design are symmetric - check if the garment twist and measure the difference if found
  • Check percentage statements for each kind of fiber in a garment.
  • Hanger check if there is a hanger on the item-The hanger should be same as the approved sample and should not be damaged or distorted in any way.
  • Check the net weight for sweater garments (unit: lbs per dozen). Check 3 pieces per size.
  • Fitting on a model or a doll, If no mannequin available ask someone to wear his (her) size and insert picture of front, back and side-Should fit perfectly to the model and have the same effect than client pictures.
    ** ALL LINING DO NOT HANG OUT OF SELF FABRIC WHEN THE GARMENT IS WEARING
  • Feeling by hand to check if the fabric with humidity.
  • Perform a check the smell of fabric/garment is BAD?
garment inspection

An example of the garment pre-shipment inspection ->Measurement Chart:

size point size 10 size 12 tol
chest at U'arm seam level 70 0 1 0.5 1 0 75 0.5 1 0 1 0 2
underbust at seam 68 -0.5 -1 -0.5 0 0.5 73 -1 0 0.5 0.5 0 2
waist at seam 68 0 -1 -0.5 0 0.5 73 -0.5 0 0.5 0.5 0 2
hem-2 x across back 111 1.5 1 2.5 1.5 1 116 1 1.5 1 1.5 1 2
C/B length to hem 64.5 1 1 0.5 0.5 0 64.8 1 1 0.5 0 1 1
neck drop front strap point to seam 15.5 0 0.5 0.5 0.5 0 15.8 0.5 0.5 0 0 0.5 0.5
neck drop back strap point to seam 17.5 0 0.5 0.5 0 0.5 17.5 0.5 0.5 0 0 0 0.5
front strap separation 18 0 0 0 0 0 18.6 0 0 0 0 0 0.5
back strap separation 10 0 0 0 0 0 10.6 0 0 0 0 0 0.5
strap length 21.5 0.5 0.5 0 0 0 22.4 0.5 0.5 0 0.5 0 0.5
cup length 18.8 0.2 0 0.2 0.2 0 19.4 0.5 0 0.5 0 0.5 0.5
CF waistband depth 11 0.5 0 0 0.5 0 11 0.5 0.5 0 0 0.5 0.5
CB waistband depth 9.5 0.5 0 0.5 0.5 0 9.5 0.5 0 0.5 0 0.5 0.5
zip length 30 0 0 0 0 0 30 0 0 0 0 0 0.5

3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.

 

Menu
x