Preshipment Inspection quality QC check > Laptop Tablet Pc Mobile Cell Phone Iphone Ipad Ipod Accessories Bag Pouch Armband
We offer professional quality inspections services for laptop, tablet PC, MID, mobile phone, Iphone/Ipad/Ipod accessories etc.
- Quantity Inspection
- Packing Inspections: assortment, carton sealing, tapings, shipping marks, gift boxes and wrappings etc.
- Labels, SKUs, Barcodes, Logos
- Measurements, Sizes, Weights
- Colours, Assemblies
- Function & Safety On-site Testings
- Visual Defects: Critical Defects, Major Defects, Minor Defects
- Special requirements & attentions etc.
Please find below for some test points for electronic product quality pre-shipment inspections:
|Check basic operation.-Make sure the PC can work properly:
- Default program launch
|Check computer configuration (Internal check)-Based on critical component list provided (BOM)-S1||PASSED|
|Perform a power input test-As per rated power-II||PASSED|
|*S* Perform an Hi-pot test for adaptor-According to EN 60335-1 standard: 60s at below voltage according to insulation: - 1250V for basic insulation -1750V for supplementary insulation - 3000V for reinforced insulation. Take clear pictures for following information: AC/DC socket, Requested voltage and calibration label-II||PASSED|
|Perform an accessories check-No missing item-II||PASSED|
|Make sure the PC can work properly (Perform Start up - Default program launch - Shut down).--S2||N/A|
|*S* Perform a pulling test for main supply cable-60N for 1 min: no displacement greater than 2mm and no breakage allowed.-S1||N/A|
|Perform a battery check:
/ Voltage / Polarity / Capacity check/ Voltage as per rating / Polarity as per specifications/Capacity to be checked by running charge and discharge test and record the related curves-S1
|Perform a fatigue test for keyboard/tablet and locker (if any)--S1||PASSED|
|Perform a continuous running test.-Load PC with software and/or movie reading to reach full load for 4 hours.-S1||PASSED|
|Perform a rub and adhesive test on printing and marking
-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth soaked with petroleum spirit/ if the spirit not available, use the 95% alcohol. Expected result: After the test, the marking shall be legible, marking labels shall not be easily removable and they shall show no curling.-S1
|Check screen display quality.
- Maximum definition allowed : as per client specifications
- Dead pixel check : only 1 dead pixel allowed (to be reported if found though in defect list)-II
|Perform the assembly check if applicable.-S1||FAILED|
|Perform a basic software check-Check software installation, webcam, WiFi, USB connections, DVD-ROM, etc. -S1||FAILED|
3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA control assurance services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.