China Inspection

CTS SERVICE LIMITED
Shenzhen WeCheck CTS Co Ltd

Goodsolutionsfor yourbusiness!

Preshipment Inspection quality QC check > Toilet Bath Tub Hot Tub Sink Shower Faucet


What are the on-site inspection methods for toilets, Bathtubs, Hottubs, Sinks, Showers, and faucets etc?

  • Aesthetic, visual defects, workmanship, surface and function check
  • Packaging, safety and drop tests
  • Labels, markings, logos & barcodes check
  • On-site safety, regulation & function testing (Please refer to the below testing points)
  • Product specs, and special requirements check
  • Quantity & assortment verifying
  • Measurements & sizes check

The available inspection types are:


Chaozhou toilet Inspection Services

The checkpoints for quality inspection of toilet:

CHECK LIST COMMENTS RESULT
Perform a carton drop test on the export cartons:10 times(1 corner 3 edges 6 faces)-3cartons
Smell check-check if there are any strong offensive odor-II
For 3M Tape adhesive test: perform test on coating (painting/plating/ screen printing, etc) with 3M tape.-S2(
Perform a rub test for printing and marking ; Adhesive test for coating if applicable
-For rub test: The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with a piece of cloth soaked with ... alcohol - After the test, the ....shall not be easily removable and they shall show no curling.-S1
Perform a barcode –scanning test The barcode should be scannable and have the correct number. (-S3)
Perform assemble and function check(Must normal function and No sharp point &Edge) -S1
Check the basin (wall hung) should have (in almost all the orders) a set of brackets on each box and a hole open and two pre-punched
CHECK THE WATER DEPTH for basin only
Check the flush system work properly. (Handle and button).
For Toilets: No water leaking testing:
No water leaking testing on 20 pcs
100 small balls (....), flush at least 95%
12 toilet papers: use ? liters of water, flush once (flush ? papers, allow ? papers remaining)
After flushing, the deep of water seal is >=? inches. The water seal surface is 120*100mm2
Please, check for tank adapter inlet and report size. Check the inside diameter and length for adapter


3rd party preshipment products goods factory onsite inline final Random AQL PSI TPI FRI DUPRO third party on-site in-line pre-shipment QA control assurance inspection services in China India Vietnam Thailand Malaysia Bangladesh Taiwan.


367

Twitter